Teleskop Service T2 Thin Profile Filter Changer

TS – T2 Filter Quick Changer for 36 mm unmounted filters – only 10 mm optical length:

The shortest Filter Quick Changer for extreme solutions if you have nearly no space – the changer is made for D=36 mm unmounted filters e.g. from Baader. Advantages of the Filter Quick Changer in comparison with other systems:

there is no limit to the number of different filters you can use very very low profile this also results in best possible field illumination the filter quick changer needs less space than e.g. a filter wheel the filters currently not in use can be stored protected from dew and dust. In classical filter drawers the filters are completely unprotected!

Specifications:Very short T2 female connection thread on the telescope side:The thread is very short – if your connection adapterhas a longer T2 thread, you will need T2 fine tuning rings (look to suggested accessories). If the connection thread goes too deep into the filter changer, the drawer will be blocked, you cannot move it.

Very short combination – TS Filter Quick Changer AND TS Off Axis Guider: only 21.2 mm in length!

This is the shortest combination imaginable – Off Axis Guiding AND Filter changing (Second Picture).

Details:
• Optical length: only 10 mm
• Telescope site connection: T2 (42 mm x 0,75) female thread
• Camera site connection: T2 male thread — Diameter: 80 mm
• Weight: only 75 grams included filter drawer

–

Filter Quick Changer incl. 1x filter drawer for unmounted 36 mm filters – low profile. Only 10 mm optical length! The shortest filter quick changeraround!

Very very low profile Best possible field illumination The filter quick changer needs less space than e.g. a filter wheel

TS Filter Quick Changer with one filter drawer