Promaster Desktop Broadcast Stand

Quick Overview

• Clamps on surfaces up to 2″ thick
• Adjustable Height
• Two ball heads for perfect positioning

Product Description

Turn your desk, table, counter, or workbench into a broadcast studio!

The ProMaster Desktop Broadcast Stand clamps to the edge of a desk, table, or countertop surface up to 2″ thick. It supports two accessories while reaching over and around your computer.

Use the Desktop Broadcast Stand to support two objects like a camera and a light, or a light and a mic, or ??? Position them at any angle you like using both ball heads. Raise and lower the main upright using its 3 sections with a range of 17 5/8″ (min. height) to 41 3/4″ (max. height). Then clamp-on the extension arm anyplace along the upright to hold a second accessory.

The ball head on the upright is removable, revealing a common 1/4″-20 bolt for an alternative mounting method. The ball head on the extension arm is permanently connected.

* Note: The clamping surface must have a minimum 2″ overhang to properly support the Desktop Broadcast Stand, and it may be up to 2″ thick.